Gardening Tips

In my previous post, I talked about setting the fence posts for a 3-foot high fence. The next step is to put railings on your fence.

The further apart your fence posts are, the more likely you are to crack, warp, or sag your railings. I have two spans that are 10 feet apart, and realized after having already set the fence posts that this was not a good idea. My recommendation is to keep your fence posts no more than 6 feet apart (4 feet is ideal if you want strong railings). This provides enough support that you can actually lean on the fence railing.

After your fence posts are plum and have been set in cement for a few days, you can cut your fence railings to size. I encourage you to keep your fence posts at 90 degree angles, as cutting the mitered edges of your fence railing can be a cumbersome and painstaking task. I spent about twice as long on the mitered edges as I did on the straight edges. Be careful – if you cut it too short, you’ll need to scrap it and start over.

I used a compound miter saw for all the railings. The wood was a 2×4 by 10 feet (2 spots) and 8 feet. I also had a few 6 feet and shorter spans for the curved part of the fence.

I placed my railings on edge, as this will result in less sag over time that means you can’t just run it across the top of the fence post, you have to screw it in to the side of the fence post. Having the angles meet up to the 4×4 post can be challenging, even require a recut once or twice. I found it to be somewhat painstaking and suggest avoiding angles if you are able to do 90-degree turns.

After all your fence post holes are dug, it’s time to mix the fence post concrete and set your posts.

It’ll look nicer and save you the hassle of having to trim off the top of the fence posts if you make sure all your post holes are the same depth. Aside from the depth of the hole, you need to be sure the top of the posts are all the same height — if your ground is not flat you may have variations in the height after you’ve sunk the posts.

I found it would have been better to place all my posts in the fence post holes and line them up (adding dirt or digging more) where necessary such that they all lined up.

Mixing Concrete

Mixing concrete is one of the hard labor exercises you’ll get to do! I used an old shovel and wheel barrow to mix the cement. Usually 2-3 bags at a time so I’d have enough to set 2-3 posts. Be careful to over flow it with water too much water and you’ll need to add more cement mix to counter balance. Also, be sure the wheel barrow is on solid ground, the last thing you want is to knock it over and have to cleanup.

Pouring Concrete

Pouring concrete is rather easy. I simply scooped it out with the shovel and dumped it into the hole with the post in the hole. Put one scoop on each side of the post and then straighten the post. You have some time before it starts to harden, be careful not to use too much cement. If you overfill the hole then you’ll have to work around big chunks of cement when planting flowers or bender board later.

Plum Your Posts

Plumming your posts is the most critical part of the process. You’ll need a level with a bubble to be sure the post is straight. You’ll want to plum both sides, so it is straight. Simply put the level along the post on one side and tap the post lightly to get it inline. Then do the same on the other side 90 degrees (not the opposite side). You can check all four sides as well to be sure the post is level. Be sure you’re cement is not too wet otherwise the post can rise up or tilt after you walk away. I recommend checking them again in 30 minutes to be sure they haven’t shifted.

Watch for Water

If you have water in the holes as I did after a recent rain, be sure to use enough dry concrete to absorb it all, otherwise you end up with concrete soup, and your fence posts may float up on you while you’re trying to plum them. I gave a few taps on the top with a rubber mallet to be sure the post had sunk down enough — the last thing you want is to realize the next day a fence post floated up on you, and the concrete has already set.

Be sure to get enough stakes (about 1.5 to 2 feet long) so you can brace your fence posts after you set them with concrete. Nail two stakes across the bottom at an angle — one on each side to brace the post. A rubber mallet works well for pounding the stake into the ground at a 45 degree angle and then nailing two nails into the fence post to keep them in place.

It took me about 7 hours to set 14 fence posts — although the last 4 . About two-thirds of that time was spent mixing, so if you are in a hurry you may want to use the alternative method where you pour dry concrete mix into the hole and get an attachment for the garden hose that you can sink down into the hole to water the cement.

The first-time gardener is in for a pleasant surprise of just how rewarding and relaxing tending the Earth can be. To get started, designate your garden territory and start thinking about what would please you in that empty space. Dream as big as you dare and let your creative powers bring it into being. And with a few simple steps, your garden oasis will be underway.

1. Create A Master Plan.

Before you invest in anything, the first step is to draft a blueprint to optimize your outdoor space and keep the garden in balance. Choose the flowers according to shape, size and color and splatter your garden pallet according to your exact specifications. In addition to planting your buds, be sure to allow some space for garden statuary, solar lighting, pathway stones and any other ornamental pieces to complete your garden collection. The master plan approach will save you time, money and ensure that you get the results you want.

2. Gradual Progress.

Rome wasn’t built in a day, and neither will be your perfect garden paradise. Half the fun of growing a garden is the journey getting there, so take your time and enjoy every session. The garden experience can be a lifelong endeavor, even down to the treasures and trinkets you add to the mix. Rather than making your garden art purchases all at once, let life take its course as you find each special touch here and there at a rummage sale or discount outlets in different regions.

3. Minimal Investment.

To get started on your garden space, you need only make a nominal investment for tools and accessories that will last you for years. Your local hardware store should carry everything on your shopping list to include a garden hose with a spray nozzle, fork for turning the dirt, a spade, gloves, sun hat, fertilizer and perhaps some fencing or cages if you plan to grow tomatoes. Your florist in Toronto can supply the seeds. In addition, you will need a means of transporting your materials such as a water resistant basket and perhaps a wheel barrow for larger garden areas.

4. Bring Life To Your Garden.

When you are finished planting, your hard work will have paid off with a stunning and tranquil environment tailor-made for you. In addition, if you wish to attract the locals, birds and butterflies bring a living animation of sights and sounds to your new garden retreat. Add a few stylish bird feeders and try planting some colorful creeping foliage up a trellis to encourage your new friends to stay and rest comfortably. Sparrows in particular are partial to building nests inside a towering Bougainvillea plant, where they may dwell safely from predators at night. In addition, wind chimes make a nice soundtrack to accompany your garden art, adding a tinkling tune to the breeze.

5. Scheduled Maintenance.

The early stages of tending a garden are filled with excitement and anticipation, however, be sure you have allotted yourself ample time to care for the plants over their lifetime. Irrigation must be done at regular intervals and pruning infected leaves is a must to save your foliage from disease. If your garden maintenance is reserved for the weekends, you may wish to install some automated sprinklers to ensure your plants get a drink when you are away.